Residential
Commercial
Panel
Certified
Service
Repair
Installation
24/7
Light
Fixture
Free Quote
Licensing
Switches
Efficient
Dimmers
Fan
Improvement
Mack 'n' Mack Elec Contrs
Whitehorse, Yukon Territory, Y1A 5X9, Canada
Howard Electric Ltd.
1 Pintail Pl, Whitehorse, Yukon Territory, Y1A 0J7, Canada
fast, friendly, helpful - thanks James!!
Tlingit Electric
31 11 Ave E, Whitehorse, Yukon Territory, Y1A 4H8, Canada
Underhill Geomatics Ltd.
Whitehorse, Yukon Territory, Y1H 1H4, Canada
Morrison Hershfield
301 Hawkins St ##101, Whitehorse, Yukon Territory, Y1A 1X5, Canada
Sam's Electric
12 Ave E, Whitehorse, Yukon Territory, Y1A 5X9, Canada
Castle Power
89B McFadden Dr, Whitehorse, Yukon Territory, Y1A 0A8, Canada
Mueller Electric Ltd
20B Boulder Rd, Whitehorse, Yukon Territory, Y1A 5S8, Canada
SOMA Electrical Systems Ltd
28 Engelmann Dr, Whitehorse, Yukon Territory, Y1A 6K4, Canada
Amazing. They don't make you wait. They explain everything in detail.
Exact Electric: Seattle Commercial Electrical Contractor
10115 Greenwood Ave N ##233, Seattle, Washington, 98133, United States
Exact electric is a fast, responsive, clean and does stellar work!
Kēyeh Nejéh Golder Corporation (KNG)
Whitehorse, Yukon Territory, Y1A 2V3, Canada
Peabody's Photo Parlour
2 Ave, Dawson, Yukon Territory, Y0B 1G0, Canada
They take amazing old-timey photographs.
All the staff are really friendly & winsome
Crain Ventures
Dawson, Yukon Territory, Y0B 1G0, Canada
Grenon Enterprises
Dawson, Yukon Territory, Y0B 1G0, Canada
Arcrite Northern Ltd
Eureka Dr, Dawson, Yukon Territory, Y0B 1G0, Canada
KPI Northern Ltd
Watson Lake, Yukon Territory, Y0A 1C0, Canada
George's Electric
9992 Sidney Rd SW, Port Orchard, Washington, 98367, United States
Georges Electric is professional, very knowledgeable and reliable. We have worked with them on several projects and they always do more than expected. You will not be disappointed....
Conduit Electric
19461 SW 89th Ave, Tualatin, Oregon, 97062, United States
With all these glowing reviews, we had to give them a shot, but unfortunately we ended up extremely disappointed.
Just to get an estimate was $145, it isn't fun, but relatively typical, we'll take it. Labor is $145/hr, so it makes sense to us.
They show up at around 10am. The estimate comes in at $800, which includes parts, labor, working on two circuits, and a city permit fee of $75 each circuit. That leaves us about $650 for parts and labor based on the estimate. About $300 higher than another estimate we got from another company for free, but they're here now, so let's just get it done.
Then we learn they don't have the necessary parts or equipment. They spend the next hour driving around to get parts. They say the parts are only going to be around $125, so we're thinking 2-3 hours labor + parts + city fees...seems reasonable...we should come in right under the $800.
A little way in to the work, it looks like they can make just one circuit work, so the city fee will be half, just one $75 charge. Now we're thinking we'll come in well under the $800 now, since the labor is almost done, the parts cost is known, and the city fee will be cut in half. We estimate in our head around $635 (3 hours labor @ $145/hr + $125 + $75).
Job is done. It is a little after 2pm. Time to write-up the invoice.
What? It looks like we're going to be billed for the hour it took them to go get the parts for the job. I suppose we should have just had them come back another time, so that they were prepared from the start.
So now we're at around 4 hours total, that's like $580 + half the city fee ($75) + about $125 for parts. Around $780, right? Looks like the estimate is about right.
Wrong.
They said parts would be around $125, but they were $210. Ugh. Okay, but that's $85 more and we saved $75 on one city fee, I guess that's OK. Now we're at $865. A little bit higher than estimated, especially when we thought we were going to come in under, but not too crazy...but we keep going down the invoice.
We were wrong again.
Turns out the $145/hr quote for labor was if there was only one person, but the second apprentice person costs extra, $75/hr more. That's another $300 that was not disclosed to us upfront.
All said and done, the total was $1164 and some change. But we got a meager discount and it was *only* $1100.
$300 more than the original estimate, despite half the city fees. $600 more than another company's estimate we received. Never doing business with them again.
Phoenix Electricians Today
23309 N 17th Dr #120, Phoenix, Arizona, 85027, United States
The electrician came to my house on time. He saw what the issue was and gave me an affordable quote. He completed the work and made sure to cleanup after himself when he was done. I needed a 220v outlet converted to 110v. I am very happy with the results of the work and will definitely use this company again!







